Before going to the setup in de fields, I want to make sure all is working properly.

There was one preamp that did not came alive so good I had a spare. (already fix it)

As you can see all the led’s are working.

I did not connect the preamp to the rx port and the delay lines it was just to make sure all preamp's are working.

The last part I have to do is to put it all in a weatherproof box.

That will be done when I have a free moment again.

12/09/2020

I have some old aluminium case in stock  so it is the perfect fit for this project.

2 holes are made in it to let the coax enter the box, I used a short 45degrees pvc pipe so I cannot harm the coax.